| Specifications: |
| Engine: |
CAT 3126B, EPA and CARB Tier II compliant, turbocharged, ATAAC, water-cooled diesel engine |
| Engine H.P.: |
175 HP (130 KW) @ 2100 RPM, Continuous Rating (“A” rating) |
| Fuel Capacity: |
120 Gal. (454 L) published consumption 13 gph (49 L/hr) |
| Cooling: |
Special combination engine radiator, heat exchanger, intercooler mounted in front of the engine with pusher fan |
| Digging Depth: |
72" (1829mm) |
| Digging Width: |
18” (457mm) minimum, 24” maximum (Bucket width to be specified by Buyer) |
| Digging Drive: |
Heavy Duty, Hydraulic Motor Driven Wheel Drive Gear Reducer with Integral Flywheel mounted directly to the No. 1 Head Shaft. |
| Head Shaft: |
4.25" (108mm) dia. 4140 Shaft |
| Wheel Rims: |
¾" (19mm) Mild Steel with Replaceable Weld-on Segments |
| Buckets: |
14 each, ¾" (19mm) Mild Steel, welded, crown style |
| Bucket Backs: |
¾" (19mm) Mild Steel |
| Teeth: |
Hensley X156 with roll pin |
| Wheel Trucks: |
1 Upper, 2 Lower – Heavy Duty (run in oil) |
| Conveyor: |
Reversible Hydraulic Drive for either right or left discharge, 24" (610mm) wide x approx. 7' (2134mm) long center to center with belt skirting rated @ 1000 fpm (305 M/min) |
| Undercarriage: |
D-4 size Crawlers, 6 bottom rollers, 1 top carrier roller, Salt Chain w/Split Master Link, Rock Guards, spring loaded, grease gun type front idler assemblies. 16” (400mm) wide triple grousers. |
| Undercarriage Drive: |
O&K planetary gear reduction boxes with in the planetary hydrostatic bent axis, two speed motors with independent speed control by electronic hand levers. Planetaries equipped with parking brake. |
| Speed Range: |
Working Speed 0 – 30 fpm (0 – 9.14 Mpm), Travel Speed 0 – 200 fpm (0 – 61 Mpm) |
| Approximate Weight: |
Estimated 34,000 lbs (15385 kg) |
| Standard Features: |
| Hydraulically Retractable Crumb Shoe |
| Crumb Shoe Bottom Wear Plate 500 Brinnell Hardness - Bolt-on |
| Dual Wheel Lift lift cylinders and dual Tilt cylinders located on Boom Frame |
| Hydraulic Conveyor Shift Mechanism |
| Undercarriages bolt connected Trencher Body. |
| Wheel Rock Guard |
| Bridge Type Boom Frame |
| Tool Box |
| Hinge Up Operator Seat located on left side of Trencher Body |
| Fixed counterweight supplied |
| Grease Gun Type Take-ups on Conveyor Pulleys |
| Anti-Vandalism Latches & Guards |
| Roll Over Protection Structure (ROPS) |
| Back-Up Alarm |
